Metrohm NIRS XDS MultiVial Analyzer - Manual (Page 56)

54 ▪▪▪▪▪▪▪
highlighted area of the table.
Print:
This prints the table containing the Sample ID,
Product ID, Order, and Comments, as shown at
right.
The full length of the table will be printed – it is
cut off here for clarity. Print in “portrait” mode.
Use Iris:
If the user needs to scan a sample using the Iris Adapter, this
box should be clicked. (This resets the choice made in the
“Select Tray” dialog box.)
The user should remove the tray. Vision will position the tray
mechanism out of the way, to allow the Iris Adapter to be
inserted.
When finished, the Iris Adapter should be removed, and the
tray re-inserted into the MultiVial mechanism.
Failure to remove the Vial Adapter will cause an error to be
reported in Vision.