Metrohm 871 Advanced Bioscan - Manual (Page 39)

4.6 Diagnostic tests / Validation / GLP
871 Advanced Bioscan / Instructions for Use 8.871.1003
31
4.6 Diagnostic tests / Validation / GL
The requirements of G ood Laboratory P ctice) include a peri-
odic check of analy rumen -
producibility and acc Standard ures,
SOP.
Under the title «Application Bulletin No.
Validation of
M chro n example of such a standard op-
erating procedure is available from Metrohm; it can be adapted and
used with the 871 Advanced Bioscan.
Further information on the subjects of QA, GLP and validation can also
be found in the broc management with Metrohm»,
which is available fro g
Testing of the electron al funct f Metrohm
instruments can and s ould be performed as par regular service
by trained personnel of the manufacturing company. All Metrohm in-
struments are equipped with start-up-test routines or per-
fect functioning of the relevant assemblies when the instrument is
switched on. If no error message is displayed, it may be assumed the
instrument is operating
The Metrohm compan also supplies its instruments with an integrated
diagnostic program which, in the case of possible malfunctions or faulty
behavior, allows the service technician to check the functioning of cer-
t nd
P
LP (G ra
tical measuring inst
uracy using
ts with regard to their re
Operating Proced
277 –
etrohm ion matographs» a
hure «Quality
m your local Metrohm a
ic and mechanic
h
ency.
ion groups o
t of a
which check f
without faults.
y
ain assemblies a localize the fault.