3 mounting the extension module on ic instrument, Mounting the extension module on ic instrument, Figure 5 – Metrohm 872 Extension Module Sample Prep User Manual
Page 19: Covering plate from above
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
872 Extension Modul – Sample Prep
■■■■■■■■
11
3.5.3
Mounting the extension module on IC instrument
Note
Before you begin make sure that the preparation work (see Chapter
3.5.1, page 9) has all been carried out.
Dismounting covering plate
2
2
1
1
Figure 5
Covering plate from above
1
Cylinder screws
2
Covering stoppers
1 Dismounting covering plate
■
Remove covering stoppers (5-2).
■
Undo the cylinder screws (5-1) with a 6.2621.100 3 mm hexagon
key.
■
Remove covering plate.
2 Mounting extension module
Place the extension module onto the IC instrument.
Advertising