E-flite Ultra Stick 25e ARF - Manual (Page 19)

  3. Attach the clevis to the 5 5 /
8
" (143mm)
pushrod wire. Thread the clevis onto the pushrod
wire at least 12 turns.
  4. Attach the clevis to the control horn. Plug the
aileron servo into the receiver and turn on the
radio. Center the aileron servo electronically. Use
a felt-tipped pen to mark the pushrod wire where
it crosses the servo horn.
Hint:.Use.painter’s.tape.to.tape.the.aileron.
to.the.wing.tip..This.will.hold.the.aileron.in.
the.centered.position.while.you.prepare.the.
pushrod.wire.
19