E-flite Ultra Stick 25e ARF - Manual (Page 6)


High Power Setup
EFLM4032A Power 32 BL Outrunner, 770Kv
CSEPHX45 45-Amp Brushless ESC (depending
on propeller used)
CSEPHX60 60-Amp Brushless ESC (depending
on prop used)
THP42002S2PPL 4200mAh 2S2P 7.4V Li-Po, 13GA
(2 req in series for 14.4V)
APC11070E Electric Propeller, 11x7E
APC11055E Electric Propeller, 11x5.5E
EFLC3005 Celectra 1 - 3 cell Li-Po Charger
EFLAEC303 EC3 Dev & Batt, Male/Female
This is a high power setup for very strong flight performance
and float flying.
Warning
An RC aircraft is not a toy! If misused, it can cause
serious bodily harm and damage to property. Fly
only in open areas, preferably at AMA (Academy of
Model Aeronautics) approved flying sites, following all
instructions included with your radio.
Keep loose items that can get entangled in the propeller
away from the prop, including loose clothing, or other
objects such as pencils and screwdrivers. Especially keep
your hands away from the propeller.
Required Tools and Adhesives
Tools & Equipment
EFLA250 Park Flyer Tool Assortment, 5-piece
Or Purchase Separately
EFLA257 Screwdriver, #0 Phillips (or included
with EFLA250)
EFLA251 Hex Wrench: 3/32", 7/64" (or
included with EFLA250)
Nut driver: 1/4"
Drill
Drill bit: 1/16" (1.5mm), 5/64" (2mm),
Hobby knife
Felt-tipped pen
Pliers