E-flite Ultra Stick 25e ARF - Manual (Page 26)

2
 2. Plug in the servos and ESC into the receiver.
Mount the receiver to the side of the fuselage
using hook and loop material. Route the
antenna wire through the bottom of the
fuselage to the rear.
Note:.Do.not.cut.the.antenna.wire,.as.this.will.
reduce.the.range.of.your.radio.system.
Important:.When.using.high-power.servos.or.
the.Quad.Flap.option,.you.will.need.to.install.a.
receiver.battery.and.switch.harness.