User notices, Warning: hot liquids – Bunn LCR-3 User Manual

Page 4

Advertising
background image

4

Optional Field Wiring

120/208 V, 37.6 A, 7820 W

1PH, 3-Wire + GND, 60HZ

120/240 V, 43.2 A, 10400 W

1PH, 3-Wire + GND, 60HZ

FOR USE ON INDIVIDUAL BRANCH CIRCUIT ONLY

120/208Y V, 32.8 A, 12000 W

3PH, 4-Wire + GND, 60HZ

28181.0004

37947.0002

USER NOTICES

Carefully read and follow all notices on the equipment and in this manual. They were written for your protec-

tion. All notices are to be kept in good condition. Replace any unreadable or damaged labels.

00656.0001

00986.0002

37280.0000

37881.0000

CHARGE

Type R134A, Amount 13 oz (368.6 gm)

Design Pressures:

High 276 psi (19 bar) (1.9 MPa)

Low 88 psi (6 bar) (0.61 MPa)

33461.0004

27508.0000

To reduce the risk of electric shock,

do not remove or open cover.

No user-serviceable parts inside.

Authorized service personnel only.

Disconnect power before servicing.

Moving Parts.

Do not operate

unit with this

panel removed.

Risk Of Electrical Shock.

Disconnect power before

servicing unit.

27442.0000

!

CAUTION

Do not connect to a

circuit operating at

more than 150 volts

to ground.

WARNING:

HOT LIQUIDS

41129 060111

L1

L2

L3

N

FOR 3-PHASE OPERATION

CONNECT INPUT WIRING TO

L1,L2,L3 & N AS SHOWN.

BLK

BLU

RED

WHI

TERMINAL

BLOCK

TO MACHINE

FROM POWER SOURCE

TO MACHINE

FROM POWER SOURCE

L1

L2

L3

N

BLK

RED

BLU

WHI

FOR SINGLE PHASE OPERATION

MOVE BLU WIRE INTO

TERMINAL BLOCK WITH BLACK

WIRE, CONNECT INPUT WIRING

TO L1, L2 & N AS SHOWN.

00824.0002

40054.0000

REMINDER!

CLEAN AIR FILTER

WEEKLY

(LOCATED UNDER THE DISPENSER)

RECORDATORIO!

LIMPIAR EL FILTRO DE
AIRE SEMANALMENTE

(LOCALIZADO DEBAJO

DEL DISPENSADOR)

AIR FILTER

CLEAN WEEKLY!

(LOCATED UNDER THE DISPENSER)

FILTRO DE AIRE

LIMPIAR

SEMANALMENTE!

(LOCALIZADO DEBAJO

DEL DISPENSADOR)

As directed in the International Plumbing Code of the

International Code Council and the Food Code

Manual of the Food and Drug Administration (FDA),

this equipment must be installed with adequate

backflow prevention to comply with federal, state

and local codes. For models installed outside the

U.S.A., you must comply with the applicable Plumb-

ing /Sanitation Code for your area.

Artwork for P/N: 00656.0001
Artwork Rev: A
Drawn: REF
Date: 04/22/10

Advertising