Motion control - advanced, Head unit – Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) User Manual
Page 25
HEAD UNIT
MOTION CONTROL -
ADVANCED
CONTINUED
25
8.
Select the desired
PAN Motor OFF
time
Note: Only for Continuous & No Intervlmtr
Again, the default is 0.05 s (seconds). This is the amount of time the
motor remains off before running again. Leave this at the default for
now by pressing the MIDDLE JOYSTICK BUTTON or ENTER.
9.
Select the desired
PAN Motor Power
The default power is 40 and is a good starting point for time lapse work.
The power setting tells the ORACLE how much power to send to the
motor when it is on.
Press the MIDDLE JOYSTICK BUTTON or ENTER to continue.
Note:
The PAN Power setting can be either a positive number or negative
number. This will determine whether the Head Pans left or right. Two
determine whether you need a negative or positive number, make
note of the X/Y values on the home screen. If you move left and the
X values are negative, you’ll know that you need a negative value set
for Pan Power to move left and a positive Pan Power to move right.
10.
Select the desired
Run Time/Pictures/Axis 1 Cycle
Note: Only will show Pictures in Stop Motion
Note:
The number of Pictures is also the Axis 1 Cycle
Cycles are the number of times your motor will cycle on/off for the
move. To increase or decrease the amount of time you want the
move to last, toggle the JOYSTICK UP/DOWN to adjust the number of
cycles. The time value will change to tell you how long the move will
take. Once you have your cycle settings adjusted, press the MIDDLE
JOYSTICK BUTTON or ENTER to continue.
11.
Select the desired
TILT 2 Motor On
Note: Only will show in Continuous and No Intervlmtr
12.
Select the desired
TILT 2 Motor OFF
Note: Only will show in Continuous and No Intervlmtr
13.
Select the desired
TILT 2 Power
13.
Select the desired
TILT 2 Cycles
Note: Only will show in Continuous and No Intervlmtr
The above for menus are have the same meaning
as the similar
SLIDER
menus.
TILT Motor ON
0.05 S
TILT Motor OFF
0.05 S
TILT Power
40
TILT Cycles
1005
24M 17S
Pan Power
40
PAN Motor OFF
0.05 S
Run Time
24M 14S
Pictures
1003