Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) - Manual (Page 5)

A. Backlit LCD Screen
The LCD screen displays menu options and current status of the ORACLE.
Below is a sample of the home screen and values.
1. MAX SPEED value (28 - 1000) see G.
2. DAMPING in seconds (.05s - 2.55s) see H.
3. DEADBAND mode (LIN or LOG) see I.
4. Current Joystick Y speed value (+/-)
5. Current Joystick X speed value (+/-)
6. LIN/LOG value (0-99 in LIN mode and 99-0 in LOG mode).
To access child menus from the home screen, press the MENU button ( B. ) on
the ORACLE.
B. ENTER Button
The ENTER button is used to save settings when making changes to the
ORACLE options. Alternatively, the center JOYSTICK BUTTON ( J. ) can
also be used in most cases.
C. MENU Button
The MENU button is used to call up the ORACLE menu when on the
home screen. It can also be used to escape back to parent menus and
cancel changes when altering settings in the ORACLE options.
D. E. F. Memory banks 1, 2, and 3
The ORACLE has 3 memory banks for storing and playing back camera
moves. Each bank can be cleared by holding the corresponding button
down for 5 seconds.
The 1, 2, AND 3 BUTTONS can also be used to select their
corresponding menu options when navigating the ORACLE settings
menus.
ORACLE™ OVERVIEW
510
- 0
1 2 3
4 5 6
1.25S
- 0
LIN
99
This section will cover the basic functions of the ORACLE and what
each button and dial controls in the system.
A Backlit LCD Screen
B ENTER Button
C MENU Button
D Memory Bank 1
E Memory Bank 2
F Memory Bank 3
G MAX SPEED Control Dial
H DAMPENING Control Dial
I Deadband Control Dial
J Joystick Button
K Joystick
5