Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) - Manual (Page 4)

CONNECTING THE ORACLE™
Powering up and connecting your ORACLE to an elektraDRIVE
motor or Revolution pan/tilt head.
The ORACLE does not have an on/off switch. To power the unit on,
simply connect it to the provided power source.
Connect either an elektraDRIVE motor or Revolution head using the
included CAT5 network cable. If you need a longer or shorter cable, any
standard CAT5 network cable can be used in place of the provided one.
The Revolution Head requires two RJ45 plugs to be connected to the
CAT5 cable coming from the ORACLE unit. A 2-way CAT5 splitter is
included with the Revolution head so both motors can be connected.
4