Sindoh D202 - Manual (Page 59)

3
-9
Loading Paper
3
Loading envelopes
Up to 10 envelopes can be loaded into the tray at a time.
Reference
- Before loading, remove air from the envelope(s), and securely press along the flap fold line.
Otherwise, it will result in wrinkles or a paper jam.
1 Position so the flap part is facing up, and load an envelope as shown in the figure.
- When the flap is in the long side of an envelope, load the envelope so that its flap is placed at the back.
2 Align the paper guide to the paper size.
3 Lower the lever to raise the push up plate.
The paper setting screen is displayed in the Message Window of this machine.
4 Change the paper type and paper size on the Control Panel.
- If the size of the envelope set up is not found in the list of paper sizes, check the size of the envelope
and then specify the size in [Custom].