Sindoh D202 - Manual (Page 79)

5
-15
Basic Usage
5
3. Using the copy function
How to copy
1 Press the 【Copy】 key.
2 Load the original.
Reference
- Do not place an original heavier than 4-7/16 lb (2 kg) on the original glass. Furthermore,
do not use excessive force to press down on a book or any other form of original that must be spread
on the original glass. Otherwise, the machine may be damaged or a failure may occur.
3 If necessary, configure copy settings.
- The standard size will be detected automatically.
If you fail to set the original size correctly, the image may be cut off.
- For details on copy settings, refer to page 5-16 .
4 If necessary, specify the number of copies using the Keypad.
- To re-enter the number of copies, press the 【Back】 key.