Introduction of copy function, Introduction of copy function -16, Basic usage – Sindoh D202 User Manual
Page 80
Basic Usage
5
-16
5
Press the 【Start】 key.
-
If you press the 【Stop/Reset】 key while scanning the original, scanning stops. To stop scanning the
original, check that [YES] is selected when an message appears to prompt you to stop scanning, then
press the Select key.
The original is scanned, and copying starts.
Introduction of copy function
This section describes the convenient copy functions. For details on how to use each function,
refer to [User’s Guide Copy Operations].
Function
Overview
[Zoom]
You can copy an original image enlarged or reduced by an arbitrary zoom
ratio.
[CLR]
Select a color for copying.
[Orig. Type]
Select the optimum settings for the original to copy it at the optimum image
quality level.
[DENSITY]
Adjust the density of a copy image.
[Original Direction]
Specify the orientation of the loaded original.