Sindoh A610dn - Manual (Page 64)

Using the Printer
3-
20
Note
- In the control panel, you can print the Network Report.
- If "SINDOH A610 Series Printer Status Monitor" connected via the USB port is running,
you cannot use the network setting program(SINDOH Network Printer Setup).
If "SINDOH A610 Series Printer Status Monitor" connected via the USB port is currently
running on the bottom left tray of your PC, close it and run the network setting program.
Wireless Network Setting
An additional Wifi device is required for accessing wireless network setting(sold separately)
Wireless Network Connection
1 When the printer is ready, press the 【◀】 or 【▶】 button.
2 Press 【◀】 or 【▶】 until setting appear, and then press the 【OK】 button.
3 Go to Network Setting -> Wifi Network -> Setup Connection.
Press 【 OK】 in Connection Setting to search Wireless networks.
4 Available wireless network devices are displayed.
Select the wireless network AP(SSID), and then press the 【OK】 button.