Sindoh A610dn - Manual (Page 65)

Using the Printer
3-
21
E.g. When the wireless AP (SSID) is “A60x_AP” it is displayed as follows.
A60x_AP
In front of the AP (SSID), the reception level is displayed.
There are five reception levels.
Very Low Low Normal High Very High
Note
- If reception is very poor, the wireless AP will not be found. Although it may be found on other devices,
it may not be found on this product.
5 ① If there is no security setting, wireless network setting is complete.
② If the wireless AP has security setting, the wireless network security window appears.
WEP:
Enter the WEP security key for authentication. If a connection is successfully made, wireless network
setting is complete.
Note
- For WEP, the 64-bit or 128-bit WEP encryption key is used.
WPA/WPA2:
Enter the WPA key. If a connection is successfully made, wireless network setting is complete.
Note
- Just as with WEP, WPA uses TKIP (Temporal Key Integrity Protocol) and AES(Advanced
Encryption Standard) for data encryption.