Changing the print setting of the print driver, Entering default print settings, For windows users – Sindoh A610dn User Manual
Page 68
Using the Printer
3-
24
Note
- In the control panel, you can print the Network Report.
- If "SINDOH A610 Series Printer Status Monitor" connected via the USB port is running,
you cannot use the network setting program (SINDOH Network Printer Setup).
If "SINDOH A610 Series Printer Status Monitor" connected via the USB port is currently
running on the bottom left tray of your PC, close it and run the network setting program.
When the device is shipped from the factory, its default network setting uses automatic configuration,
by which an IP is automatically assigned. To change network setting to fixed IP (Manual setting), contact
your network administrator. If the IP address is selected arbitrarily, the device may not be connected to
the network.