Clarion MAX973HD - Manual (Page 115)

19
MAX973HD
English
Owner
’s ma
nua
l
2Zone Function
About the 2Zone Function
The 2Zone function is a function that assigns
separate source output to the Front zone (this
unit) and Rear zone (the optional rear monitor) by
simultaneously playing two sources in this
system. Therefore, the rear passengers are
allowed to enjoy a different video source from the
source played on the monitor of this unit.
• The source sounds of the Front zone are
output from the speakers of the vehicle side,
and those of the Rear zone are from the
optional infrared headphone systems.
• Controlling a source assigned to the Rear zone
can be made by using the optional remote
control unit. To control it from this unit, once
assign the same source to the Front zone, then
control it.
Note:
• When a voice interrupt of the navigation system
arises during the 2Zone function is turned on, the
sound of the Front zone is muted, and the sound of
the Rear zone is output normally.
When it arises during the 2Zone function is turned
off, the audio signals to the 4ch speakers are
attenuated, and the voice from the navigation
system is output from the front two speakers.
• You cannot operate the 2Zone function during the
voice interrupt of the navigation system.
• When the same source is assigned for Front and
Rear zone, operations in a zone are also applied
for another zone.
• The 2Zone function is disabled when the
Telephone mode is selected.
• When a telephone interrupt arises while the 2Zone
function is turned on, the 2Zone function is
automatically turned off, and it does not resume
the 2Zone ON status even when the interruption is
finished (only when the TV tuner is connected).
Assignable media sources for Front/
Rear zone
● For Front zone
All the sources except for the Telephone mode
can be assigned for the Front zone.
● For Rear zone
The following sources can be assigned:
• DVD video mode
• TV Tuner mode
• AUX mode
Setting the 2Zone function
• The factory default setting is off.
1. Press the [SRC] (Source) button to display the
Source menu screen.
2. Touch the [2Zone] key to turn the 2Zone
function on.
The zone select keys are displayed at right of
the [2Zone] key.
3. Touch the desired Source key you wish to
assign for the Rear zone, and perform
operations for the source mode.
4. Touch the [Rear] key to switch to the Rear
zone, and touch the same Source key
previously selected.
5. Touch the [Front] key to switch to the Front
zone, and touch the desired Source key you
wish to assign for the Front zone.
6. To turn the 2Zone function off, press the
[SRC] (Source) button and touch the [2Zone]
key.