Clarion MAX973HD - Manual (Page 171)

75
MAX973HD
English
Owner
’s ma
nua
l
Troubleshooting
Problem Cause Remedy
General
Power does not turn
on. (No sound is
produced.) Fuse is blown. Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
Incorrect wiring. Consult your store of purchase.
Nothing happens
when buttons are
pressed.
Display is not
accurate.
The microprocessor has
malfunctioned due to
noise, etc. Turn off the power and open the operation panel.
Press the Reset button with a thin rod.
Note:
• When the Reset button is pressed, the system is
restarted with the Audio feature OFF.
• When the Reset button is pressed, frequencies
of radio stations, titles, etc. audio setting data
stored in memory are cleared.
There are red,
green, or blue points
in the display.
—
This is not a failure, but a phenomenon peculiar to
a liquid crystal panel (The liquid crystal panel is
produced according to technology with very high
precision. Note that, though there are effective
pixels of 99.99% or more, pixel missing or
normally lit pixels account for 0.01%.)
DVD Player
Disc cannot be
loaded. Another disc is already
loaded. Eject the disc before loading the new one.
There is a foreign matter
already in place. Eject the foreign matter forcibly.
Sound skips or is
noisy. The disc is dirty. Clean the disc with a soft cloth.
The disc is heavily
scratched or warped. Replace with a disc with no scratches.
Sound is bad directly
after power is turned
on. Water droplets may form
on the internal lens when
the car is parked in a humid
place. Let dry for about 1 hour with the power on.
The image is not
displayed. The parking brake is not
engaged. Check that the parking brake is engaged.
Disc cannot play with
the display
“PARENTAL
CONTROL
Please change the
parental access
level to playback
the current disc.”
shown. The view is limited. Release the view limitation or change the parental
level.
➜ “Setting up the parental level” (P. 29)
Reset button