Clarion MAX973HD - Manual (Page 15)

16
MAX973HD
English
Manipulating the Map Screen
Scrolling the Map
Touching the Map screen displays a cursor at the
centre of the screen, and you can scroll the map.
For the 2D map, touch the map to move the map
to the touched position, and keep touching the
map to scroll the map towards the touched
direction.
For the 3D map, touch the upper part of the map
to scroll the map toward the touched direction,
and touch the left or right part to rotate the map
while touching.
2D Map
3D Map
Displaying the map of the
current car location
When the [MAP] button is pressed, the map
around the current location is displayed with the
vehicle in the centre of it. When the vehicle runs,
the behaviour is the same.
Zooming IN/OUT the map
Press the [OUT] (Zoom Out) or [IN] (Zomm In)
button to change the map scale.
The 2D map can be adjusted in 11 steps, and the
3D map in 10 steps.
Note:
For the 2D/2D or 2D/3D map, these buttons work
upon the right map. To adjust the left map, touch the
left map, and then use these buttons.
Changing the map
appearance
The Map screen can be adjusted regarding
orientation or appearance of the map.
Screen examples
• 2D Map
[Back] key:
Returns to the current location map screen.
[OK] key:
You can set the location under the cursor as the
destination or store the location to the Address
Book.
➜ “Location menu (Menu on scrolled
map)” (P. 9)
[IN] (Zoom In) button:
Increases the map scale, and shows a more
detailed map. Keep touching it to enter the Free
Zoom mode.
[OUT] (Zoom Out) button:
Decreases the map scale, and shows the map of
a wider area. Keep touching it to enter the Free
Zoom mode.