Clarion MAX973HD - Manual (Page 186)

Wire Connection
90
MAX973HD
English
IN
ST
AL
LAT
ION
AND
WIR
E
CONNE
CT
ION MA
NUAL
Example of relay usage
Use a special installation kit (relay lead kit), sold separately, prepared specifically for your model. For
applicable models, consult the dealer where you purchased this unit.
Note:
• When connecting the main power supply lead (yellow) of the main unit, connect it to a spare terminal of this
unit.
Replacing the fuse
If the fuse should blow, check to see if the wiring is correct. If a fuse is blown, replace it with a new one
of the same amperage rating as the original (10A FUSE).
To replace the fuse, remove the old fuse of the power supply lead and insert the new one.
Note:
• There are various types of fuse holder. Do not let the battery side touch other metal parts.
CAUTION
• After the connection, fix the lead by a clamp or insulation tape for protection.
Vehicle coupler
(Yellow)
Relay lead (Sold separately)
Conforms to EIAJ standard (CP2501)
Ground lead from this unit
Tighten with the vehicle side screw and fasten
securely to the vehicle metal part.
To main unit
(Yellow)
Fuse
(10A FUSE)
Fuse holder