Clarion MAX973HD - Manual (Page 44)

Navigation Settings
45
MAX973HD
English
Map Design settings
You can change the map appearance, such as
the colours of the map, type of vehicle mark, etc.
Map Colour
Selects the colours of the map for the Day mode
(when illumination is turned OFF) and for the
Night mode (when illumination is turned ON).
“Map Colour (Day)” / “Map Colour (Night)”:
Touch the item key, then touch one of the [Map
Colour 1] to [Map Colour 4] keys you wish to set.
Vehicle Icon
Selects the type of the vehicle mark from 2 types.
“Vehicle Icon”:
Touch the desired mark you wish to use.
Route Colour
Selects the colour of the suggested route
displayed on the Map screen.
“Route Colour”:
Touch the desired colour you wish to set.
Landmark Icon display
Switches ON and OFF Landmark icon display for
each type.
1. Touch the [Landmark Icons] key.
The list of the Landmarks is displayed.
2. Touch the [ON] or [OFF] key of the desired
icon type you wish to change the setting for.
The types of Landmarks that can be set are
the following five types. The factory settings
are all ON.
➜ “Landmark icons” (P. 14)
“Petrol Station”
“Restaurant”
“Car Park”
“Hotel”
“Hospital”
Avoid Area Settings
You can register areas you do not want to pass
or areas that often get congested as an Avoid
Area. When you register the Avoid Areas, you
can set the system to calculate routes avoiding
the registered areas.
➜ “Setting the conditions
of the route calculation” (P. 34)
Up to 10 Avoid Areas can be registered. You can
edit the registered Avoid Areas.
Note:
You can also register/edit them from the [Stored
Data] of the Setting menu.
➜ “Avoid Area” (P. 50)
To register an Avoid Area
1. Touch the [Avoid Area Settings] key.
The list screen of Avoid Areas is displayed.
2. Touch the [None (Add New)] key.
3. Search the area to avoid by a similar way as
for entering a destination.
The setting screen of the Avoid Area is
displayed with the map of area found.
4. Touch the desired menu item to set.
[Rename]
You can change the name of the Avoid Area.
Enter the name, then touch the [OK] key.
[Resize Area]
You can change the size of the Avoid Area in
5 steps. Touch the [Large], [
I], [Medium],
[ i], or [Small] key.
[M-way]
You can set whether to avoid motorways
passing the Avoid Area.
• [included]: Avoided.
• [not included]: Not avoided.
[Delete]
Delete the current Avoid Area.
[
]
You can correct the location of the Avoid Area
by moving the cursor on the map.
5. Touch the [OK] key.
To edit an Avoid Area
1. Touch the [Avoid Area Settings] key.
2. Touch the Avoid Area you wish to edit.
3. Touch the desired menu item to set, and set it
by a similar way as for registering Avoid
Areas.
➜ Step 4 above
4. Touch the [OK] key.