Left panel, Panel descr ip tions – Sound Devices PIX 220i User Manual
Page 10
Left Panel
3
2
1
4
1)
eSATAp External Drive Connector
Connection for portable, bus-powered
drives. Also compatible with (non-pow-
ered) eSATA to connect to large capacity
drives. V
for an up-to-date list of tested and
approved storage devices.
2)
Drive Bay
Insert an approved 2.5-in drive mounted
to a PIX-CADDY into the Drive Bay.
When not in use, keep covered with the
supplied rubber grommet. Drives can be
hot-swapped if the drive is not being ac-
cessed for recording or playback.
3)
SATA PIX-CADDY Connector
High-reliability eSATAp connection de-
signed to mate with the PIX-CADDY.
4)
Headphone Output - 3.5 mm
TRS stereo headphone connector. Can
drive headphones from 8 to 100 ohms
to very high headphone levels. Head-
phone volume is controlled by holding
down the AUDIO button and turning the
Control Knob. Headphone source signal
is changed by holding down the AUDIO
Button and pressing the Control Knob.
PIX 220i and PIX 240i Video Recorder User Guide
8
v. 3.52
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Panel Descr
ip
tions