Sound Devices PIX 220i - Manual (Page 9)

5) Timecode BNC
Selectable timecode input or output.
Configured with Timecode/Sync 
Timecode BNC menu item.
6) Sync Output BNC
Selectable genlock or wordclock output.
Configured with Setup Menu option
Timecode/Sync  Sync Out .
7) SDI Input BNC
HD-SDI video input. Accepts 3G-SDI,
HD-SDI, or SD-SDI signal with up to 8
channels of embedded audio.
8) SDI Output BNC
HD-SDI video output. Outputs 3G-SDI,
HD-SDI, or SD-SDI signal with up to 8
channels of embedded audio.
Right Panel
3 4 5 7
6 2 1
1) Time Code I/O LEMO-5
Time code input and output on 5-pin
LEMO® connector.
2) LANC - 2.5 mm
2.5 mm female connector for a standard
LANC (Control-L) remote. Supports
record start and stop. Can also be con-
figured as a GPIO switch closure and
used to drive an LED for record tally. See
LANC
3) HDMI Output
Outputs HDMI video with up to 8 chan-
nels of embedded audio.
4) HDMI Input
Accepts HDMI (1.4a) signal with two
channels of embedded audio. The PIX
does not record or display content en-
coded with HDCP copy protection.
5) Keyboard - USB A
USB A female connector to connect a USB
keyboard. Keyboards with integrated
USB hubs are not compatible.
6) Control Knob
The Control Knob can be both turned and
pressed. Use the Control Knob to navi-
gate between menu settings and to select
menu items. Pressing during playback
will toggle pause / play. Turning while
playback is paused will step forward or
backward by single frames.
7) Factory Programming Port
Factory use only. No user connection.
Panel Descr
ip
tions
PIX 220i and PIX 240i Video Recorder User Guide
7