Sound Devices 744T - Manual (Page 29)

23
HP Sources Description
Input 1, 1
Input 2, 2
Input 3, 3
Input 4, 4
Solo monitoring of selected input. This signal is sent to both sides of the headphones.
Track A, A
Track B, B
Track C, C
Track D, D
Solo monitoring of selected track. This signal is sent to both sides of the headphones.
Upon playback, will play as track monitor.
Monitor A, A
Monitor B, B
Monitor C, C
Monitor D, D
Solo monitoring of playback (post-record) track. Highlighted media is source of moni-
tor program. This signal is sent to both sides of the headphones. When not in playback,
headphones have no program.
Inputs 1, 2 (MS)
Inputs 3, 4 (MS)
Stereo monitoring of discrete M (mid) and S (side) input pairs. Highlighted media is source
of monitor program.
Tracks A, B (MS)
Tracks C, D (MS)
Track A, B (MS): C, C
Track A, B (MS): D, D
Track A, B (MS): CD, CD
Stereo monitoring of discrete M (mid) and S (side) track pairs. Highlighted media is source
of monitor program. Upon playback will function as MS track monitor.
Monitor A,B (MS)
Monitor C,D (MS)
Stereo monitoring of playback (post-record) discrete M (mid) and S (side) track pairs.
Highlighted media is source of monitor program. When not in playback, headphones have
no program.
Inputs 1+2+3+4
Inputs 1, 2+3+4
Inputs 1+2, 1+2
Inputs 1+3, 1+3
Inputs 2+4, 2+4
Inputs 3+4, 3+4
Inputs 1+2, 3+4
Inputs 1+3, 2+4
Combinations of summed inputs appear in each ear. The first selection is summed mono
monitoring of all four inputs.
Tracks A+B+C+D
Tracks A, B+C+D
Tracks A+B, A+B
Tracks A+C, A+C
Tracks B+D, B+D
Tracks C+D,C+D
Tracks A+B, C+D
Tracks A+C, B+D
Tracks A+C, A+D
Tracks B+C, B+D
Tracks A+B+C, A+B+D
Combinations of summed tracks appear in each ear. The first selection is summed mono
monitoring of all four tracks.
Inputs B-format stereo
Tracks B-format stereo
The built-in SoundField B-format decoder uses three input or record tracks to build a left/
right stereo signal for monitoring.
When tracks (A, B, C, or D) are monitored in headphones, audio assigned to the tracks is heard in head-
phones during recording. During playback the recorded track audio is heard in headphones.
To set the
available headphone source options for headphone monitoring:
1. Enter the HP: MONITOR modes menu. Once you enter the Monitor Modes menu you will immediately be
in slot-1.
2. Turn the Rotary Switch to select the source you wish to appear first in your Headphone monitor list.
3. Once the chosen source appears, press the Rotary Switch or the soft key ENTER (tone) key to move to
the next slot.
4. Continue down the list to select the source for each slot in the list.
5. Once all sources have been chosen, select DONE and press ENTER. This will exit the headphone monitor
mode setup. You can exit the selection process by pressing the stop or cancel (backlight) key at any time.