Sound Devices 744T - Manual (Page 78)

744T User Guide and Technical Information
72
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
# Setup Name Setup Description Setup Options
64 LCD: Gain Display Sets the Main LCD Display to show the gain values
of inputs 1 and 2 always or to show Bit Depth and
Sample Rate and Gain of input 1 and 2 only when
attenuated.
• Bit Depth, SR & Gain
• Gain Only
65 LCD: Scrolling Direction Defines the direction in which the Multi-Function
Rotary Switch will navigate throughout the 744T.
• Normal
• Reverse
66 Meter: Ballistics Selects among five different meter ballistics set-
tings
• VU only
• Peak only
• Peak-hold only • Peak+VU
• Peak-hold + VU
67 Meter: Peak Threshold User-set level in dBFS where track peak LED’s
illuminate. 0 LED doubles as track peak indicator.
0 to -20 dBFS (1 dB increments)
68 Meter: Stealth Mode Enables LEDs to toggle on and off with the LCD
backlight key.
• Off
• On
69 HP: Rotary Switch Function Selects the functionality of the Rotary Switch’s
button when in record and playback.
• Disabled:
push makes no change to the headphone matrix.
• Selects Favorite Mode:
in record and playback modes, push will change
the headphone source immediately to the favorite
selected in HP: Favorite Mode.
• Headphones to C/D Meters:
momentarily shows headphone level on tracks C & D
LED meters.
• Playback/Monitor Drive Select
Selects the media source for file playback and record
monitoring
70 HP: Monitor Modes Select the sequence of the modes that appear in
the Headphone Source Display on the LCD.
Up to 20 source selections can be entered in any
order. See headphone monitor section in guide
for adjustment and Favorite Mode below for list of
headphone selections.
71 HP: Favorite Mode Selects the audio source monitored when the
Rotary Switch is pressed during recording or
playback.
Inputs 1,2
Inputs 3,4
Tracks A,B
Tracks C,D
Monitor A,B
Monitor C,D
Input 1,1
Input 2,2
Input 3,3
Input 4,4
Track A,A
Track B,B
Track C,C
Track D,D
Monitor A,A
Monitor B,B
Monitor C,C
Monitor D,D
Inputs 1,2 (MS)
Inputs 3,4 (MS)
Tracks A,B (MS) Tracks C,D
(MS)
Track A,B (MS): C,C
Track A,B (MS): D,D Track A,B (MS): CD,CD
Monitor A,B (MS)
Monitor C,D (MS)
Inputs 1+2+3+4
Inputs 1, 2+3+4
Inputs 1+2,1+2
Inputs 1+3,1+3
Inputs 2+4,2+4
Inputs 3+4,3+4
Inputs 1+2,3+4
Inputs 1+3,2+4
Tracks A+B+C+D
Tracks A, B+C+D
Tracks A+B,A+B
Tracks A+C,A+C
Tracks B+D,B+D
Tracks C+D,C+D
Tracks A+B,C+D
Tracks A+C,B+D
Tracks A+C,A+D
Tracks B+C,B+D
Tracks A+B+C,A+B+D
In B-format stereo
Trk B-format stereo
72 HP: Playback Mode Selects the audio source sent to headphones upon
playback.
• No change
• Same as options listed above
73 HP: Warning Bell Level Set the output level of the multi-function warning
bell.
off, -60 to –12 dBFS in 1 dB steps
74 HP: Rec/Stop Bell Alerts the user with one beep at the start of record-
ing and two beeps when the recording is stopped
• Disabled
• Enabled
75 Tone: Level Set the output level of the reference tone -40 to 0 dBFS in 1 dB steps