Sound Devices 744T - Manual (Page 86)

744T User Guide and Technical Information
80
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
XL-2 TA3F to XLR-M cable, used to connect analog outputs to third-party
devices with XLR-F inputs, 25-inch; package of two.
XL-2F XLR-F to TA3F cable, used to connect microphones, mixers, and other
devices with XLR-M outputs to the 744T analog inputs 3 and 4, 25-inch;
package of two.
XL-4 Bag of four (4) TA3-F-type connectors.
XL-14 3.5 mm right-angle TRS to 1/4-inch female TRS headphone extension, 12-
inch.
XL-B2 Removable, rechargeable, Li-ion battery; 7.2 V, 4600 mAh battery; good to
have several spares.
XL-BNC BNC to BNC cable for word clock and AES3id interconnection, 24-inch.
XL-DVDRAM An external bus-powered FireWire DVD Multi-drive. Based on the slot-
loading Panasonic UJ-85 drive mechanism, the XL-DVDRAM is used with
a 7-Series recorder to record directly to optical disk or as a post-record
storage volume.
XL-H Bare Hirose 4-pin locking DC connector (HR10-7P-4P).
XL-LB2 5-pin LEMO to two (2) BNC cable, used to jam to and from video cameras,
60-inch.
XL-LCD Protective, clear Lexan LCD cover for 7-Series Digital Recorders. Protects
the LCD glass from scratches and water. Kit of four covers.
XL-LL 5-pin LEMO to 5-pin LEMO cable, used to connect the 744T time code
circuit to Ambient time code sync boxes, slates, and controllers or to jam
one 744T to another time code equipped 7-Series recorder; additionally
used to jam Aaton cameras from the 744T, 20-inch coiled, 55-inch full
extension..
XL-LX 5-pin LEMO to XLR-M and XLR-F cable, used to connect the time code
output to SMTPE time code inputs and outputs, 25-inch to XLR-M, 14-inch
to XLR-F.
XL-NPH NP-type battery cup with 24-inch cable terminated in Hirose 4-pin locking
DC connector (HR10-7P-4P) at equipment end.
XL-RJ RJ-12 to RJ-12 for C.Link to C.Link 702, 702T, 722, and 744T recorder
linking, 12-inch.
XL-SATA SATA Drive Interface provides an internal connection to 2.5-inch SATA
(Serial ATA) hard drives for 722 and 744T models originally equipped with
PATA / IDE internal hard drives. Drive not included.
XL-WPH3 AC to DC Power Supply (in-line) 100 - 240V 50/60 Hz input, 12 VDC 3.75
A (45 W) output, Hirose 4-pin DC plug. Supplied with 3-pin IEC cord for
use in North America and Japan. It is always good to have a spare.