Sound Devices 744T - Manual (Page 79)

73
# Setup Name Setup Description Setup Options
76 Tone: Frequency Allows the user to set the frequency of the refer-
ence tone oscillator
100–10,000 Hz in 10 Hz steps
77 Tone: Mode Select the destination of the reference tone or to
disables it completely
• disabled
• to record tracks only
• to outputs only
• to record tracks and outputs
78 Tone: Record Lock Sets the Tone key to be either available or locked
while in Record Mode.
• Enabled While Recording
• Locked While Recording
79 Drive: Speed Tests Performs a write/read speed test on the internal
hard drive, CompactFlash, and external drives.
Data transfer speed is measured in KB/s.
Caution: Drive test will disable processing and mute
outputs for duration of test. Outputs will not return
until test is exited.
80 INHDD: Space Shows the drive file system, total size, and space
remaining on the internal hard drive.
81 INHDD: Erase / Format Formats the internal hard drive.
Caution, while various PC utilities are able to re-
cover files from a re-formatted drive, once format-
ted old audio data is not accessible by the 744T.
• Empty Trash
• Empty False Takes
• Empty both
82 INHDD: Empty Trash Allows user to delete files previously sent to the
trash as well as false takes.
83 CF: Space Shows the drive file system, total size, and space
remaining on connected CompactFlash medium.
84 CF: Erase / Format Formats installed CompactFlash medium
Caution, while various PC utilities are able to
recover files from re-formatted drives, once format-
ted, old audio data is not accessible by the 744T.
85 CF: Empty Trash Allows user to delete files previously sent to the
trash as well as false takes.
• Empty Trash
• Empty False Takes
• Empty both
86 EXHDD: Space Shows the drive file system, total size, and space
remaining on connected external medium.
87 EXHDD: Erase / Format Formats attached FireWire storage volume
Caution, while various PC utilities are able to
recover files from re-formatted drives, once format-
ted, old audio data is not accessible by the 744T.
88 EXHDD: Empty Trash Allows user to delete files previously sent to the
trash as well as false takes.
• Empty Trash
• Empty False Takes
• Empty both
89 Balance Cal Calibrates the center position of the input 2 pot
when used as the balance control for MS recording.
Place balance control to center and press to select.
90 Power: Ext Low Batt Volt Sets the warning voltage of the low battery alert
with an external power source. Internal battery
warning threshold is factory set.
10.0–18.0 VDC, 0.1 V steps
91 Power: Ext Power Function Controls the behavior of the unit when power is
applied to the external DC jack.
Pin-3 (+) of the external DC input must be wired in
order for the External Power Functions to operate.
• Do Nothing
• Power On Unit
• Power On and Start Record
• Power On/Off unit
• Power On/Off unit and Record