Sound Devices 633 - Manual (Page 17)

L, R, 1-6 L, R, X1-X4, RTN
Note that the time and date is displayed in place of the small RTN meter on the L, R, X1-X4, RTN Meter
View
Input Settings Screen
The Input Settings Screen displays all relevant information for the selected input as well as allow-
ing these parameters to be changed. The default method for accessing the Input Settings Screen for
inputs 1-6 is to slide the Input Select Switch toward the desired input number. This functionality can
be altered when Setup Menu option INPUTS > PFL Toggle Mode is set to 3ch ( See “PFL Toggle Mode”,
page 25 ).
When the Input Settings Screen is accessed, that input is soloed in the headphones (the Headphone
Source is changed to PFL of the selected Input). The Headphone Source changes back to its previous
source when the Input Settings Screen is exited. The Input Settings Screen can be entered without
altering the Headphone Source by holding the Select Encoder down while sliding the input Select
Switch. This behavior is reversed when Setup Menu option INPUTS > PFL Toggle Mode is set to 3ch
( See “PFL Toggle Mode”, page 25 ).
The following two screen shots are of Input 2 and Input 4, respectively. These examples demonstrate
how Input Settings Screens 1-3 differ from Input Settings Screens 4-5.
3) Input Meter 7) Limiter Activity
2) Input Number
1) Track Name
11) Input Polarity
5) HPF Frequency
6) Aux Bus Assignment
8) Input Selection
9) Headphone Source / Level
10) LR Bus Assignment
4) Current Fader Gain
Scr
een Ov
er
vie
w
633 User Guide and Technical Information
11