System, Se tup menu – Sound Devices 633 User Manual
Page 68
#
Parameter Name
Description
Options
6
Scene Increment Mode
Selects which format the scene increments will
use. To quickly increment a scene name press
and hold the Headphone Encoder then slide the
Transport Control right (Fast Forward)
» Disabled
• Character
• Numeric
7
Take Reset Mode
Defines when take numbers are reset. Reset
brings take number to <1>
• Never
• Scene Change
• Daily Folder Change
» Either Scene or Daily
8
File Playback Mode
Determines what (If any) playback action the 633
will perform upon reaching the end of a file during
playback.
» Play Once
• Play All
• Repeat One
• Repeat All
9
Default Playback Card
The source media that files will be played from
when playback is initiated.
» CF
• SD
10
Erase/Format CF
Formats CF card to FAT32 (32 GB or less) or
exFAT (greater than 32 GB) file system.
11
Erase/Format SD
Formats SD card to FAT32 (32 GB or less) or
exFAT (greater than 32 GB) file system.
System
#
Parameter Name
Description
Options
1
Slate Mic
Enable or disable the internal slate microphone.
• Off
» On
2
Slate & Tone Routing
Displays the Slate and Tone Routing screen where
the slate mic and tone signal can be routed to various
destinations.
3
Tone Level
The level of the 633’s internal tone generator.
• 0-20 dBu (1 dBu increment)
» 0 dBu
4
Tone Frequency
The audio frequency of the 633’s internal tone gen-
erator.
• 100-10000 Hz (10 Hz increment)
» 1000 Hz
5
Tone Mode
Continuous tone generates tone a the set tone level
to all bus tracks. L Ident mode pulses the amplitude of
tone to the Left channel of the Master Bus by -20dB.
» Continuous
• L Ident
6
Warning Bell Level
The level of warning bell signals in the Headphones.
• Off, -60 to -12 dBFS
(1dB increment)
» -30 dBFS
7
Record/Stop Bell
Alerts the user with one beep at the start of recording
and two beeps when the recording is stopped
• Off
» On
8
Meter Ballistics
Selects among the two different meter ballistics set-
tings.
• VU Only
» Peak + VU
• Peak Only
9
Meter Peak Hold Time
Adjusts the duration for which the peak indicator stays
illuminated.
» 1 sec
• 2 sec
• 3 sec
• 4 sec
• 5 sec
• Infinity
• Off
10
Meter Display Style
The visual style of the meters. Segmented shows
individual blocks separated by gaps and Solid shows
a solid bar.
» Segmented
• Solid
633 User Guide and Technical Information
62
v. 1.02
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Se
tup Menu