Sound Devices 633 - Manual (Page 72)

Connector Pin Assignments
Connector Pin Assign-
ments
Notes
(3) XLR-3F
Analog Inputs 1-3
AES3 Digital Input 1
1 – ground
2 – signal (+)
3 – signal (-)
Mic- and Line-level balanced. For unbalanced, pin 1 and
pin 3 tied together = ground, pin 2 = positive.
Channel 1 AES3 Digital Input: AES3 balanced or unbal-
anced.
(3) TA3M
Inputs 4-6
1 – ground
2 – signal (+)
3 – signal (-)
Active balanced inputs 4-6. For unbalanced, pin 1 =
ground, pin 2 = positive, pin 3 = tie to pin 1. Mates with
Switchcraft TA3F-type connector.
(2) XLR-3M
Master Outputs/
AES Outputs
1 – ground
2 – signal (+)
3 – signal (-)
Output Level is selectable via menu between Mic, -10 dB,
or Line-level.
For unbalanced, float pin 3.
Balanced AES3 Out A,B on XLR-3M connectors, 110
ohm, 2 V p-p, AES3 and S/PDIF compatible with RCA
adaptor.
(1) 3.5 mm
RTN
tip – signal L
ring – signal R
sleeve – signal ground
Mates with 3.5 mm TRS jack. Signal is unbalanced.
(2) TA3M
X1, X2 Outputs
1 – ground
2 – signal (+)
3 – signal (-)
Active balanced, output level is selectable in Setup Menu
as Line, -10, or Mic level. For unbalanced, pin 1 = ground,
pin 2 = positive, pin 3 = float (no connect). Mates with
Switchcraft TA3F-type connector.
(1) 3.5 mm
X3,X4 Output
tip – signal L
ring – signal R
sleeve – signal ground
Mates with 3.5 mm TRS jack. Signal is unbalanced.
(1) 1/4-inch Female
Headphone
tip – signal L
ring – signal R
sleeve – signal ground
Mates with 1/4-inch TRS jack.
(1) 5-pin LEMO
Timecode
1 – ground
2 – SMPTE TC In
3 – ASCII in/out
4 – tuning out
5 – SMPTE TC out
LEMO B-series connector, pin assignments as viewed on
panel-mounted connector
(1) Hirose 4-pin
DC Input
1 – ground
2 – not connected
3 – not connected
4 – DC (+)
10-18 Volt DC input. Mates with Sound Devices XL-NPH
and XL-WPH3 powering accessories. See Accessories for
details.
633 User Guide and Technical Information
66
v. 1.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Connect
or Pin Assignments