Sound Devices 633 - Manual (Page 43)

When using 47.952kF sample rate, set Setup Menu option TIMECODE > Frame Rate to 23.97ND or
29.97ND. When set to 23.97ND, files will be stamped with a frame rate of 24. When set to 29.97ND,
files will be stamped with a frame rate of 30ND.
MP3 recording is not allowed in “F Mode”.
Playback
The 633 can play back any file it has recorded. To play back the last file recorded or loaded, press the
Play Button. In the Take List or File List, pressing the Play button will initiate playback of the high-
lighted take.
When playback begins, the file name will be displayed on the Main Screen with a green background.
The time code and absolute time areas of the Main Screen will display the time code and absolute
time of the file being played back. Pressing the Stop button will pause playback, and pressing the
Stop button when playback is paused will stop playback.
The media that files will be played back from is highlighted with a green background on the Main
Screen and RTN Screen. To toggle the default playback card, press and hold the Headphone Encoder
then press the slide the Transport Control down (Play).
By default, playback will be routed to all outputs of the 633. To limit playback to headphone out-
puts only, set Setup Menu option OUTPUTS > Playback to Outputs to Headphones Only. During
playback, Input PFL switches will solo the respective ISO track of the playing file to the headphone
output.
WAV files recorded on the 633 will play back to tracks as they were recorded. MP3 files recorded on the
633 will always play back to the L and R tracks.
Recor
der Se
tup and Contr
ol
633 User Guide and Technical Information
37