Trebor 110E - Manual (Page 17)

MODEL 110E PUMP OPERATION / MAINTENANCE MANUAL PAGE 17

Lay the pump on its side with the tact nuts facing down.

Lift off head.

Remove the main seal and diaphragms.

Remove the body assembly.

Remove the second set of diaphragms and main seal.

Remove tie bolts.
NOTE: All polypropylene and fluoroplastic parts, when disassembled, should be
thoroughly washed and be free from acid residue for handling purposes.
4.7.a Body Disassembly

Remove check bore caps using ½” pin tool and remove seals.

Remove sleeves with sleeve removal tool, check balls and O-rings.

Unthread one push plate from the shaft.

Remove remaining push plate and shaft from body.

Unthread second push plate from shaft.

Remove shaft seals from the shaft bore, taking care not to damage the shaft
bore or shaft seal grooves.

Remove base mount from body.