Unitec WashPay - Manual (Page 12)

W A S H P A Y
Document Number: WP1010
Document Title: WashPay Owners Manual
2.3.3 Equipment Interface
The Equipment Interface Set-up page is used to configure the interface between the card terminal
and existing coin box and the pulses per coin or bill. These settings should only be changed by your
distributor.
2.3.4 User Interface Set-up
The User Interface set-up page is used to change messages displayed to customers and adjust ‘time-
warning times for certain timer modes. This page is also used to customize the text on the screens,
that an operator may wish to adjust including the welcome message, thank you message, and stop
button message.
2.4 Receipt Printer Setup
The receipt printer setup only requires a paynode name and header and footer text. The site operator
may change the receipt message text at any time.
2.5 Download Devices
Once the self-serve and receipt printer profiles have been configured, the device profile must be
downloaded. You may choose to download each device individually or download all devices at once.
The devices will reboot and come up in operational mode.
2.6 User Management
Unique User IDs and passwords should be set up for employees, service personnel or others that
may need access to the WashPay system. The User Set-up pages are used to create new user
accounts and to edit or delete an existing account. User privileges that can be assigned are arranged
in groups as follows:
• User Management – Allows the user to set-up and manage other user accounts.
• Device Set Up – Allows access to the device (profile) programming functions.
• Accounts and Promotions – Allows the user to set up and manage promotional programs
and house accounts.
• Reports – Allows the user to access the WashPay’s accounting reports
• Utilities – Allows the user to access system utilities including data logging and database
back-up functions.