Casio AP-500 - Manual (Page 10)

E-6
Connections
IMPORTANT!
• Whenever connecting something to the digital piano, first
use the VOLUME controller to set the volume to a low
level. After connecting, you can adjust the volume to the
level you want.
Bottom
Connect commercially available headphones to the
PHONES
jack. Connecting headphones to the
PHONES jack cuts off output to the speakers, which
means you can practice even late at night without
bothering others. To protect your hearing, make sure
that you do not set the volume level too high when
using headphones.
NOTE
• Be sure to push the headphones plug into the PHONES
jack as far as it will go. If you don’t, you may hear sound
from only one side of the headphones.
You can connect audio equipment or a music amplifier
to the digital piano and then play through external
speakers for more powerful volume and better sound
quality.
IMPORTANT!
• The digital piano automatically adjusts sound output to
optimize for headphone output (when headphones are
connected) or built-in speaker output (when headphones
are not connected). Note that this feature also affects the
sound output from the LINE IN and LINE OUT jacks.
Playing Output from External Equipment
through the Piano’s Speakers 1
LINE IN R jack input sounds through the piano’s right
speaker, while LINE IN L/MONO jack input sounds
through the left speaker. Connecting to the LINE IN L/
MONO
jack only causes the same output to be
produced from both speakers. It is up to you to
purchase connecting cables that are compatible with
the equipment you are connecting.
Connecting Headphones
PHONES jack
Commercially available
headphones
Stereo standard plug
Connecting Audio Equipment
or an Amplifier
Standard plug
Pin plug
Guitar amplifier
Keyboard amplifier, etc.
RIGHT
(Red)
LEFT
(White)
Audio amplifier AUX IN jack, etc.
Tape recorder, MIDI
sound source
INPUT 1
INPUT 2
Standard jack
AP500_e.book 6 ページ ２００６年１０月１９日 木曜日 午後３時５４分