Casio AP-500 - Manual (Page 23)

Playing Back Built-in Songs
E-19
The Music Library includes both built-in songs (01 to
60), plus up to 10 songs (61 to 70) that have been saved
to digital piano memory from a computer
* or SD
memory card (page E-33). You can use the procedure
below to select one of these songs and play it back.
* You can download music data from the Internet and
then transfer it from your computer to digital piano
memory. See “Expanding the Selections in the Music
Library” on page E-32 for more information.
1. Press the MUSIC LIBRARY button so the
lamp above the button is lit.
• Each press of the button toggles between the upper
lamp and lower lamp.
• This will cause the currently selected song number to
appear on the display.
2. Find the song number of the song you want to
play in the Song Llist on page A-3.
3.
Use the /NO and /YES buttons to select
a song.
4. Press the PLAY/STOP button.
• This starts the playback of the song.
• The measure number appears on the display during
playback.
NOTE
• To view the song number during playback, hold down
the MUSIC LIBRARY button.
• While playback is in progress, you can press the /NO
or /YES button to change to another song.
5. Press the PLAY/STOP button again to stop
playback.
• Playback will stop automatically when the end of the
song is reached.
NOTE
• Pressing the /NO and /YES buttons at the same
time will select Music Library song number 01.
1. While playback is in progress, hold down the
REW button.
• This skips back through the song measure-by-
measure.
• The measure number appears on the display while
you are skipping back.
2. When you reach the point you want, release
the REW button to resume playback.
NOTE
• Depending on what is being played when you press the
REW button, the skip back operation may not start right
away when you press it.
Playing Back a Specific Music
Library Song
Measure number
Skipping Back through a Song
Measure number
AP500_e.book 19 ページ ２００６年１０月１９日 木曜日 午後３時５４分