Casio AP-500 - Manual (Page 22)

E-18
Playing Back Built-in Songs
IMPORTANT!
• After you select a built-in song, it can take a number of
seconds for the song data to be loaded. While the data is
being loaded, the song number will flash on the display,
and the keyboard keys and button operations will be
disabled. If you are playing something on the keyboard,
the following operation will cause output to stop.
Your digital piano has a total of 74 built-in songs. You
can use the procedure below to play back all of the
songs, one after the other.
1. While holding down the MUSIC LIBRARY
button, press the PLAY/STOP button.
• This will start playback of the 74 built-in songs in
sequence, from t.01 through L.60.
• You can play along with a song on the keyboard
during all-song playback. The tone assigned to the
keyboard is the one that is preset for the song that is
playing.
• You can use the /NO and /YES buttons to skip
sequentially between songs during all-song playback.
• If you press a TONE button, playback will jump to
the demo song that uses that tone. If you press the
MUSIC LIBRARY
button during all-song playback,
playback will jump to Music Library song L.01.
• Pressing the /NO and /YES buttons at the same
time will jump to main tone demo song t.01.
2. Press the PLAY/STOP button to stop all-song
playback.
/NO
/YES
PART/TRACK
PLAY/STOP
MUSIC LIBRARY
REW
FF
Playing Back All of the Built-in
Songs
Type
Number of
Songs
Display Indicator
Main Tone
Demo Song
14
The TONE button of the
main tone being used flashes,
and the demo song number is
on the display.
Music
Library Song
60
The Music Library lamp
flashes and the song number
is displayed.
AP500_e.book 18 ページ ２００６年１０月１９日 木曜日 午後３時５４分