Casio AP-500 - Manual (Page 40)

E-36
Using an SD Memory Card
To transfer song data from an SD memory
card to the digital piano user area
1.
Press the MUSIC LIBRARY button so the
lamp above the button is lit.
2. Use the /NO and /YES buttons to
display the number of the user area song
(Music Library song number 61 through 70) to
which you want to transfer the song data.
3. Hold down the CARD button until its lamp
starts to flash slowly and “LdU” (Load User
area) appears on the display.
4. Use the /NO and /YES buttons to
display the file number of the song data you
want to transfer to digital piano memory.
5.
When everything is the way you want, press
the TEMPO/SETTING button to begin data
transfer.
• The message “CPL” (ComPLete) will appear on the
display to let you know when data transfer is
complete. The number of the user area song to which
the data was transferred will be shown on the
display.
z To interrupt an ongoing data transfer operation,
press the CARD button.
z If the user area song number you select contains data
already, pressing the TEMPO/SETTING button in
step 5 will display “rEP” (rEPlace) to confirm that
you want to replace the existing data with the data
you are transferring. Press the
/YES button to
overwrite the data or the /NO button to cancel.
To transfer song data from an SD memory
card to the recorder area
1.
Press the RECORDER button so the PLAY
lamp is lit.
2. Use the /NO and /YES buttons to
display the number of the recorder area song
(1 through 5) to which you want to transfer
the song data.
3. Hold down the CARD button until its lamp
starts to flash slowly and “Ldr” (Load recorder
area) appears on the display.
4. Use the /NO and /YES buttons to
display the file number of the song data you
want to transfer to digital piano memory.
5. When everything is the way you want, press
the TEMPO/SETTING button to begin data
transfer.
• The message “CPL” (ComPLete) will appear on the
display to let you know when data transfer is
complete. The number of the recorder area song to
which the data was transferred will be shown on the
display.
z To interrupt an ongoing data transfer operation,
press the CARD button.
z If the recorder area song number you select contains
data already, pressing the TEMPO/SETTING
button in step 5 will display “rEP” (rEPlace) to
confirm that you want to replace the existing data
with the data you are transferring. Press the
/YES
button to overwrite the data or the /NO button to
cancel.
This mark indicates that the currently displayed user area song
number has data stored already. This mark indicates that the currently displayed song number has
data stored already.
AP500_e.book 36 ページ ２００６年１０月１９日 木曜日 午後３時５４分