Recording your keyboard play – Casio AP-500 User Manual

Page 26

Advertising
background image

E-22

Recording and Play Back

After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.

To record to a specific track of a specific
song

1.

Press the RECORDER button so the PLAY
lamp is lit.

2.

Use the

/NO and

/YES buttons to

display a song number (1 to 5).

3.

Press the RECORDER button so the REC
lamp is flashing.

• At this time the L/1 lamp will flash to indicate that

the digital piano is standing by for recording to Track
1.

4.

Use the PART/TRACK button to select the
track to which you want to record.

• Make sure that the lamp for the record track is

flashing.

Track 1: L/1 lamp
Track 2: R/2 lamp

NOTE

• If you want to record with rhythm or Auto

Accompaniment, select Track 1 (L/1 lamp flashing).

5.

Select the tone and effects you want to use in
your recording, and set the tempo you want. If
you are recording to Track 1, you also can
select a rhythm and accompaniment mode.

• Tone (page E-8)
• Effect (page E-11)
• Tempo (page E-14)

z Track 1 only
• Rhythm (page E-14)
• Mode (page E-16)

NOTE

• It is a good idea to use a relatively slow tempo when

recording.

• If you want the metronome to sound during recording,

press the METRONOME button.

6.

Start playing something on the keyboard.

• Recording will start automatically.

NOTE

• When recording to Track 1 with rhythm or Auto

Accompaniment: Press the START/STOP button to start
recording. You also can start recording by pressing the
SYNCHRO/FILL-IN

button and/or the INTRO/

ENDING

button, and then play a chord.

• When recording to Track 1 without rhythm or Auto

Accompaniment: Recording will start as soon as you
play anything on the keyboard.

7.

When you are finished, press the START/
STOP
button to stop recording.

• To stop recording with a rhythm/Auto

Accompaniment ending pattern, press the INTRO/
ENDING

button.

• This will cause the REC lamp to go out and the PLAY

lamp to light.

• To play back the track you just recorded, press the

START/STOP

button again.

8.

After you are finished recording or playing
back, press the RECORDER button so the
PLAY lamp and REC lamp are off.

Recording Your Keyboard Play

B

AP500_02_e.fm 22 ページ 2007年5月28日 月曜日 午後4時58分

Advertising