CITIZEN CL-S700R - Manual (Page 32)

2
Printer Operation
32
2. Install the unused ribbon and holder in to the rear ribbon drive
unit. The splines on the ribbon drive gear mechanism engage
with the end of the ribbon holder.
1
2
Setting the Ribbon
The following kinds and sizes of ribbons can be used.
Types ...................................................... Inside wound and outside wound ribbon
Max. ribbon width ............................... 114.0 mm (4.50 inch)
Min. ribbon width ................................ 25.4 mm (1.00 inch)
Max. ribbon length.............................. 450.0 m (1,476 ft)
Max. roll diameter ............................... 86.5 mm (3.40 inch)
Inner diameter of the paper core .... 25.4
± 0.25 mm (1.00 ± 0.01 inch)
Lead tape length .................................. Less than 80.0 mm
Setting method
1. Place the attached ribbon and paper core separately on one of
the two attached ribbon holders. Insert the two ribbon holders
into the ribbon and paper cores ensuring that they are pushed
in all the way.
Ribbon holders
Paper core
Ribbon