CITIZEN CL-S700R - Manual (Page 53)

53
Printer Operation
Menu Setup Mode (p.37)
Menu Setting Table (p.43)
..... 0 to 33%
..... 33 to 66%
..... 66 to 99%
..... 100% (The LCD will indicate an error if you attempt to print in this state)
..... When the door is released
..... Rewinder function off
On Line
Ready
Rewind
O f f
Setting the menu for the Rewinder
(CL-S700R only)
Set the Menu Setup Mode as follows to use the rewinder function.
When rewinding the liner using the peeler
Ensure that the "Function Sel (sub menu)" is set to "Peel On".
When the "Auto Config (sub menu)" is set to "On", "Peel On" mode is
automatically selected.
When rewinding printed media without using the peeler
Set the "Function Sel (sub menu)" is set to "Rewind".
IMPORTANT!
If the “Rewind” operation is to be used permanently, you must switch the “Auto
Config” menu option to “Off”. Otherwise, when the printer is switched on again,
the Auto Configuration selects Peel mode by default.
Rewinder Capacity Display
The LCD shows how much liner or media is on the rewinder flange at any given
time. If the rewinder is full, an error will be displayed on the LCD.