CAT Titan 250 User Manual
Page 21
Turbomachinery Package Specification
Titan
250 Generator Set
Applicable Engineering Specifications
Solar’s Engineering Specification ES 1593
Guidelines for NEC Compliance of Solar Product
Lines: Class I, Group D, Division 1 and Division 2
Solar’s Engineering Specification ES 1762
Standards and Practices for Electrical Systems For
Gas Turbine Packages Installed in Hazardous Areas
(CENELEC Standards)
Applicable Product Information Letters
Solar’s Product Information Letter PIL 149
Direct-drive AC Start Systems
Notes:
(a)
If the customer-furnished input voltage is greater than 600 VAC ±5%, a step-down
transformer is recommended.
(b)
Feeder circuits exceeding this limit require the use of an isolation transformer, line reactor, or
other means of adding similar impedance to limit fault current.
(c)
Longer cable runs may require an onskid marshalling box and/or output line reactor.
© 2008 Solar Turbines Incorporated. All rights reserved.
TPS250GS/908 - Preliminary
20