CAT Titan 250 - Manual (Page 8)

Turbomachinery Package Specification Titan 250 Generator Set
• Fuel system
• Lubricating oil system
• Turbotronic™ 4 Control System
• Onskid electrical wiring
• Skid with drip pans
• Piping and manifolds
• Ancillary air inlet system
• Ancillary exhaust system
• Package enclosure (if specified) with:
− Ventilation system
− Fire detection and suppression system
− Combustible gas detection system
2.3.1 Package Electrical System
The onskid package electrical system can be furnished to meet the following certification
requirements:
• National Electrical Code (NEC)
• Canadian Electrical Code (CEC)
• Conformité Européenne (CE) Mark
• European Committee for Electrotechnical Standardization (CENELEC)
When supplied, the offskid control console, variable frequency drives, batteries, and
battery charger are not approved for hazardous duty areas and must be installed in a
nonhazardous area.
Three-Phase Motor Voltage
All three-phase motors and three-phase electrical components have the same voltage
rating. Motor starters and contactors are not provided.
2.3.2 Service Connections
The Titan 250 generator set is supplied with self-contained systems for starting, fuel, lube
oil, and control. All service connections (Figure 2) are conveniently located on the outer
edges of the skid.
© 2008 Solar Turbines Incorporated. All rights reserved. TPS250GS/908 - Preliminary
7