ClearOne Beamforming Microphone Array Installation Guide - Manual (Page 11)

Chapter 2: Ceiling Mount Installation 8
Drop-Ceiling Tile
Ceiling Plate, Suspension Column,
Trim Plate and Mic Mounting Plate
Assembled in Drop-Ceiling Tile
Suspension Column
B
C
Trim Plate
D
Mic Mounting Plate
A
Ceiling Mounting Plate
Now you have the unsecured Suspension Column extending through the ceiling tile with the Ceiling
Mounting Plate above the tile, and the Trim Plate and Mic Mounting Plate below the tile as shown
below.
Attach the Position Clamps against the wide sides of the Suspension Column above the ceiling
tile. Allow the assembled position clamps to be loose enough to slide up and down for positioning.
Position Clamps
HB
HC
E 2X
2X
2X