ClearOne Beamforming Microphone Array Installation Guide - Manual (Page 6)

3 Beamforming Microphone Array
The Beamforming Microphone Array is connected to the CONVERGE Pro and to other Beamforming
Microphone Array units via the E-bus in the same way as multiple CONVERGE Pro units are
connected together. Each unit has a LINK IN and LINK OUT connection which allows the units to
be “chained” together with the LINK OUT of one unit connecting to the LINK IN of the next unit.
The steps in connecting the Beamforming Microphone Array are covered in the Beamforming
Microphone Array Quick-Start Guide. Instructions for configuring the Beamforming Microphone
Array are included in the CONVERGE Console version 4.X online help.