6 part numbering, Part numbering – Monarch Instrument DC6000 User Manual
Page 22
Section 3
– Installation
I.
Page 14
1/06/2012 REV 1.10.2
3.1.6 Part Numbering
The part number for the recorder is in the format as follows (See Fig 3.0 below for option location):
DC6
–
A
–
B
–
C
–
D
–
E
–
F
–
G
where each of the letters A through G has a meaning as follows:
A
Input Power:
1
-
100 to 240Vac 50/60Hz with cable and plug (Default - shown below)
2 - 18
– 30Vdc with Screw Terminals
3 -
100 to 240 Vac 50/60Hz with Screw Terminals
B
Input Channels:
06
– 6 Channels of Analog input (single row of connectors – default)
12 - 12 Channels of Analog input (dual row of connectors)
C
Output Options: 0
– None (Blank panel covers hole.)
1 -
6 Form A relay contacts 0.5A @ 200Vdc, 2 Control Inputs
2
- 12 Form A relay contacts 0.5A @ 200Vdc, 2 Control Inputs. (Shown below)
D
Serial Comms:
0
– None (Blank panel covers hole.)
1
– RS232/RS485 (9 Pin D sub) Serial Port (shown below)
E
Transmit Power: 0
– None (Blank panel covers hole.)
1
– 24Vdc 100mA isolated power output
F
Int. Memory:
1
– 512 Megabyte SD Card
2
– 1 Gigabyte SD Card
3
– 2 Gigabyte SD Card
G
FDA Compliance:
0
– Standard Unit
1
– FDA 21CFR11 Compliant Unit
The unit shown below in rear view has the part number DC6
–
1
–06–2–1–1–1–0
. (The additional 6
channels as would be in a 12 channel input recorder are shown grayed out).
Figure 3-0 Rear Panel showing ordering options
100
– 240 Vac 35VA