Monarch Instrument RFID LOGGER - Manual (Page 9)

Page 9 Rev 1.0 03122014 AJW
5.2. DATA TABLE TAB
The Data Table tab displays the graphic data in tabular format with the time and date stamp of the samples along with
the actual data recorded. The exact content depends on the type of logger being used. The Alarm information, in the
Alm 1, Alm 2 etc. columns indicate whether the data point is in alarm – indicated by “^” for high alarm or “v” for low
alarm. The user can use the scroll bar to see all the data.
On the right of the window is a summary of all data recorded and the record mode used.
5.2.1. Synchronizing Data
The synchronizing option allows a user to identify points on the graph
using the data table and vice versa.
To jump from the data table to the corresponding point on the graph,
double click the value of interest in the data table as shown right.
This will open the graph page with a box around the point of interest. Place
the cursor in the box to see details of the point. Note that in order to see
the detail and select points on the graph you should set the marker type
and size in the
setup option and zoom the graph accordingly.
To jump from a point on the graph to the corresponding
value in the data table move the cursor over the point
on the trace, the cursor will change to a pointing hand,
click the point and it will jump to the data table.