Canon elura20 - Manual (Page 105)

105
E
Using a Memory Card (ELURA20 MC only)
CARD PHOTO REVIEW
1. During/after recoding a still image, press the CARD - button to
open the CARD PHOTO REVIEW menu.
• If you press the button after recording a still image, the last image recorded
appears in the display.
• If you press the button while recording a stilll image, the menu appears
immediately.
• PROTECT , IMAGE ERASE settings appear.
• If you select
|RETURN, the still image disappears.
2. Select PROTECT and press the SELECT dial in.
• The protect mark appears on the image.
• Now you are unable to erase this image.
• Press the SELECT dial again to cancel it.
• If you select
|RETURN, the still image disappears.
2. Select IMAGE ERASE and press the SELECT dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
3. Select YES and press the SELECT dial in.
• The image is erased.
To erase an image
To protect an image
● Erasing Still Images
Erase images singly or all at once.
• You cannot erase protected images. Cancel image protection (
107) first in
order to erase an image.
• Erase images with caution. Once an image has been erased it cannot be
restored.
There are 3 ways to erase a single image.
To erase images one at a time
1.
➡ CARD PHOTO REVIEW menu (
105)
2.
➡ File Operation menu
( 106)
To erase images one at a time or erase all images on the memory card at once
3.
➡ Card Operations submenu
( 110)
: When playing back an image in CARD PLAY mode
: When displaying an index screen in CARD PLAY mode
INDEX
SINGLE
SINGLE CARD
PLAY
SINGLE CARD
PLAY
CARD
R E C
CARD
R E C