Canon elura20 - Manual (Page 143)

143
E
Additional Information
Appears immediately
after you start
recording, and the
video heads are badly
contaminated. Make
sure to clean the video
heads when this
caution appears.
There is no more
remaining memory on
the memory card.
Change the card or
erase images.
You have reached the
maximum file or
folder number.
(
97)
The image has been
recorded in an
incompatible JPEG
format or other format
that the camera can
not play back, or the
image data has been
damaged.
Appears if you have
tried to mark 51 or
more images for
printing, or if a mark
file cannot be edited.
(
108)
A memory card has
not been inserted into
the camcorder.
(
95)
There are no images
recorded on the
memory card.
You are using an SD
Memory Card and it
is set for erasure pre-
vention. Change the
position of the protect
switch.
Appears when you
press the start/stop
button in CARD REC
mode. The image isn’t
recorded on the
cassette or memory
card.
HEADS DIRTY,
USE CLEANING CASSETTE
CARD FULL
NAMING ERROR
UNIDENTIFIABLE
IMAGE
PRINT MARK ERROR
NO CARD
NO IMAGES
For ELURA20 MC
An error has occurred
with the memory card.
The camcorder cannot
record or play back. A
temporary card error
is also possible. If
CARD ERROR disappears after 4 seconds
and
flashes red, turn the camcorder’s
power off and back on again, and remove
and reinsert the card. If
flashes green,
recording or playing back is possible.
CARD ERROR
THE CARD IS SET FOR
ERASURE PREVENTION
IN CARD POSITION