Canon elura20 - Manual (Page 62)

62
E
Using the Full
Range of Features
Sound records/plays back normally.
When operating effects in MOVIE, P.SCAN or CARD REC mode, make sure the
program selector is set to
Q.
1. Open the menu and select D.EFFECTS.
2. Select D.E.SELECT.
3. Select EFFECT.
• You return to the D.EFFECTS submenu.
4. Select EFFECT again (the name of the previously selected effect
also appears).
• ART, BLK&WHT, SEPIA, MOSAIC settings appear.
5. Select the desired setting.
• The menu returns to the submenu.
6. Close the menu.
• The menu disappears and the name of your selected setting flashes in the
display.
7. If you’re in VCR mode, press the e (play) button.
8. Press the D.EFFECTS ON/OFF button.
• The name of your selection stops flashing and takes effect on the display.
• Each time you press the ON/OFF button, the chosen effect is activated or
deactivated.
Effect on/off
Select effect
Operating effects
8. If you’re in MOVIE or P.SCAN mode:
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
If you’re in VCR mode: Fade in- Press the e (play) button.
Fade out- Press the a (pause) button.
D.E.SELECT••EFFECT EFFECT••••••ART D.EFFECTS
CARD
R E C
MOVIE P.SCAN VCR
( 35)