Canon elura20 - Manual (Page 116)

116
E
Using a Memory Card
(ELURA20 MC only)
Copying Memory Card Still Images to a Cassette
-ELURA20 MC only-
MIX/SLIDE SHOW INEX SCREEN
Make sure a memory card that has images recorded on it and a cassette that has
enough recordable space have been inserted into the camera.
1. Locate the point on the cassette where you want to start copying
and set it to stop.
2. Select the first image you want to copy by using the CARD +/–
buttons.
• Still images on the memory card including and after that image will be
copied onto the cassette.
• If you want to copy all the still images on the memory card, select the first
image.
3. Open the menu and select CARD OPER.
4. Select COPY
.
• CANCEL and EXECUTE settings appear.
5. Select EXECUTE.
• Select CANCEL to stop copying.
• Cassette and card information appear in the display and copying starts.
• NOW COPYING
appears in the display.
• Each image is copied for about 6 seconds on the cassette.
• Copying stops when all the images have been copied or the tape is full.
6. Press the
3 button when your desired images have finished
copying.
[ ]
[ ]
COPY CARD OPER. [ ]
( 35)
Copies multiple still images from the memory card to a cassette.
• The still images' data codes will reflect the date and time the copies are made.
•
The SP and LP recording modes are not available when copying
memory card images to a cassette.
CARD
PLAY
VCR